Auto rewind air hose reel Fervi 0378/1510
In stock
The auto rewind air hose reel Fervi 0378/1510 is a device used for the transmission of compressed air for mechanical use. It is an indispensable tool equipped with a locking mechanism, it allows the tube to be blocked at any point, preventing it from moving if pulled or pushed. On the other hand, thanks to the slow re-entry mechanism, it is possible to prevent the hose from being rewound quickly or in a single time, thus allowing to avoid any damage caused by the hose being wound too quickly.
The auto rewind air hose reel can be mounted on the wall or ceiling. In this way it will be possible to make the most of the available space, making the device suitable for use even when the available space is limited. For assembly, simply fix the support bracket to the wall using the 3 screws supplied.
To use the device simply extract the tube for the desired length, when you stop extracting, the tube will lock automatically. In order for the hose to rewind in the most correct way, it is recommended to keep a minimum of hose extended, equal to at least 25%.
The reinforced polyurethane hose of the auto rewind air hose reel is 15 + 1 m long, and has a diameter of 13.5 x 9.5 mm. The maximum usable pressure is 18 bar / 260 psi, while the connection has 3/8 '' BSPT male fittings.
Code | R03781510 |
Max pressure | 18 bar / 260 psi |
Hose length | 15 + 1 m |
Male Fitting | 3/8'' BSPT |
Hose diameter | ø 13,5 x 9,5 mm |
Working temperature | 0 ÷ 45° C |
Weight kg | 5,82 |