Bench drill press Fervi 0260 with drive belt

The Fervi 0260 bench drill press with belt transmission is the ideal device for carrying out operations that involve drilling, boring or spot boring of different materials. Yes, a practical tool to use even when there is not much space available. In fact, it can be conveniently stored on work benches, furniture or supports. Equipped with a practical LED light lamp, it allows maximum visibility on the work in progress. There is also a digital spindle depth gauge on the head of the tool.

This bench drill press of tool has 16 different levels of spindle rotation speed. To change the speed it is necessary to move the belts on the pulley grooves of the transmission system. Inside the transmission compartment a plate is applied with the indications of the spindle rotation speed corresponding to the possible configurations.

The Fervi bench drill press is equipped with a 230 V single-phase motor. This type of instrumentation is to be considered service and not production, therefore it is suitable for intermittent and non-continuous work. During use, the motor runs at a constant speed, while the belt transmission system will regulate the spindle rotation speed.

The advancement of the bench drill press is manual, and takes place through the actuation of the spindle descent handwheel. The drill is equipped with a 290 x 290 mm rotating and tilting table. The table can reach an inclination of ± 45 °.