Bench drill press Fervi 0750 with drive belt

The bench drill press is the ideal tool for gilding, reaming or facing different types of material. In fact, it will only be necessary to vary the tool to adapt the device to the different processes and materials to be processed. Capable of reaching 12 different levels of spindle rotation speed, it is able to perfectly satisfy different needs. The minimum speed is 180 rpm while the maximum achievable speed is 2740 rpm. The advancement of the spindle along the column is instead manual and is carried out by means of the spindle movement handwheel.

The belt drive system of the bench drill press allows you to change the spindle rotation level simply by moving the position of the belts on the pulley grooves of the drive system. This type of transmission system is ideal for carrying out series operations, therefore often repetitive that do not require many speed changes.

Thanks to its small size, the Fervi bench drill press is ideal for use even in confined spaces. Provided with a base for support, it must be installed on furniture or work benches. It is also equipped with a separate 24V electrical system for the control buttons. The single-phase motor of the drill is 230 V 50 Hz 0.75 kW.

The bench drill press is available in two different versions. One version with CM2 spindle connection and a second version with CM3 spindle connection. For both versions the table measures 290x290 mm and is rotatable and tiltable by ± 45 °.