Combined bench grinder Fervi S503

The Fervi S503 combined bench grinder is perfect for use in small workshops or for DIY. Thanks to its 230V 50Hz 0.40kW single-phase motor, it is possible to use the machine also by connecting it to the domestic electrical network and to do so safely there is a plug with an earth wire to limit risks and ensure that the operator can work in complete safety. in addition to the two-button magnetic switch that eliminates the possibility of accidental or involuntary switching on.

The professional bench grinder is equipped with a drying wheel, for grinding and smoothing, and a water wheel for cleaning residues, polishing and filing of particularly resistant materials. The dry grinding wheel is protected by a protective grid and is supplied with a workpiece holder. The water wheel, on the other hand, is covered by a protective cap.

Before using it for the first time, it is important that the wheel of the combined bench grinder is fixed to the worktop thanks to the bolt grooves on the underside of the machine. Also, at each power up, check if the water wheel is at least 1cm below the water surface to ensure adequate cooling during operation.

The combined bench grinder is equipped with an identification plate with the serial number and some information pictograms relating to safety regulations. The machine is a service machine and therefore not suitable for long-term continuous operation.