Combined bench grinder Fervi S510
In stock
The Fervi S510 combined bench grinder is the professional solution for small crafts or small businesses, but also for do-it-yourselfers as the single-phase motor voltage, 230 V 50 Hz 0.40 kW, allows connection to a home electrical network. The machinery is exclusively built for short-term work as it is a service machine, therefore not suitable for continuous activity for long periods as it could be done in larger activities.
When the combined bench grinder is switched on for the first time, it will first be necessary to fix it to the work bench with bolts passing through the appropriate holes on the base. If the support surface is made of steel, it is recommended to insert a shim between the machine and the bench in order to reduce vibrations. The ignition is given by a magnetic switch with two buttons, in order to eliminate the risk of involuntary ignition.
Subsequently, the protective screen to stop any incandescent fragments and the piece holder bracket will be fixed to protect the operator on the dry grinder of the combined grinder in order to have a more stable grip during processing. The brush is already equipped with a protective casing.
Finally, the external ventilation system will be connected, the vents of which are located at the rear of the machine. The professional combined bench grinder is supplied with an identification plate and safety information pictograms.
Code | RS510 | |
Brush | 2950 rpm - Ø 150 x 20 x 16 mm | |
Dry grinding wheel | 2950 rpm - Ø 150 x 20 x 16 mm GR36 | |
Single-phase motor | 230 V 50 Hz 0,40 kW | |
Type of use | S2 - 10 min | |
Weight kg | 9,16 | |
![]() |