Dust collector Fervi 0756
In stock
The Fervi 0756 dust collector is the solution with a mouth for the suction of woodworking residues in crafts or carpentry workshops, and is also suitable for working in small and narrow spaces, even if there are more machinery as thanks to the trolley with which the vacuum cleaner is equipped, it can be moved according to which machinery will be used at that moment.
To clean the Fervi 0756 dust collector, it is important to remember that it is not possible to open the machine while it is in operation. To do this, you need to turn off the woodworking machinery to which it is attached and consequently the vacuum cleaner, then the strap must be unhooked and the bag removed, which can then be emptied. To reassemble it, simply follow the reverse procedure.
To ensure the safety of the machinery, the two buttons of the magnetic switch which the dust collector is equipped with are protected by a protective collar to minimize the possibility of accidental switching on.
The dust collector is equipped with an identification plate and information pictograms regarding the correct behavior for the use and maintenance of the machinery. Being a service machine, the vacuum cleaner is not made for continuous activities for long periods.
Code | R0756 |
Suction diameter mm | 100 |
Air capacity | 850 m3 / h |
Filtering capacity | 5 micron |
Fabric filter | Ø 370 mm |
Motor speed | 2950 rpm |
Depression | 1.08 kPa |
Single-phase motor | 230 V 50 Hz 0.75 kW |
Dimensions mm | 500 x 600 H 1700 |
Weight kg | 24,5 |