Iron bender Fervi 0102 for cold and hot bending

The Fervi 0102 iron bender is the manual solution for industrial use for bending metal plates or rods, both hot and cold, in order to satisfy every need of use. The bender is equipped with limit switches in order to guarantee greater speed and standardization of work in series: once the limit switch has been fixed, each plate or rod will have the same angle because the movement will stop at that point. The instrument is not suitable for carrying out long and continuous activities as it is a service machine.

Furthermore, the iron bender is supplied with a base so that it can be secured to a work surface, so that possible vibrations do not cause the bending of the rod or the metal plate to deburr. It is important, however, before starting to use the iron bender, to understand which bench or table is best suited to perform this role, because the weight of the machine is 30 kg.

The components of the iron bender are all manufactured to ensure that bending can be equally simple and precise. One is the stop, which serves to adjust the limit switch so that the bending can be carried out at a predefined angle, while another is the part stop, which defines the distance between the end of the piece to be bent and the bending line .

Finally, the iron bender is also supplied with the locking clamp, which tightens the piece to be bent so that it does not move during the bending, and the mobile adjustment, to adjust the width of the stop and thus correctly tighten the piece in according to the size.