Manual hydraulic bench shop press Fervi P001/10 capacity 10t

The Fervi P001/10 bench shop press is the solution that optimizes performance and compactness, so as to be able to work even in smaller spaces while still being able to carry out all activities and always in safety. It performs a pressing function on metal objects or similar materials, as often happens during the assembly operations of mechanical units, or when fitting cushions or pulleys on shafts. The press is delivered disassembled inside a wooden casing.

In line with the UNI EN 693/2009 standard, the hydraulic bench shop press is equipped with some types of safety devices. First of all, the hydraulic oil pipe is protected and produced in such a way as to reduce the risk of bursting: the pipe is in fact protected by an explosion-proof steel wire. A pressure gauge is positioned on the upper part of the frame to view the internal pressure level at any time.

Together with the anti-explosion wire, the manual hydraulic bench shop press to keep the risk of explosion under control is also equipped with an overpressure valve: in the event that a too high level of pressure is created compared to the capacity of the upper cylinder, the valve would open to discharge the excess.

Finally, the locking pins support and keep the bench and the pressing surface stable and safe and are equipped with handles to facilitate the extraction and insertion during adjustments. The hydraulic bench shop press is supplied with an identification plate with the maximum capacity and information pictograms. Being a service machine, the press cannot carry out continuous long-term work.