Modulcontainer for drums on shelf in steel with spill pallet and sliding doors group size 2

The modulcontainer is the two-storey space-saving solution for the outdoors storage of drums containing hazardous substances. The assessment of the suitability for containment of specific substances is always the responsibility of the company's HSE manager or safety advisor. The structure made entirely of galvanized carbon steel is equipped with sliding doors and is also available in the galvanized version painted in RAL9002 color (other colors are also available on request). The standard equipment consists of: ventilation grilles, continuous 80 mm slides for support, predisposition for fixing to the ground with dowels, 2 mm thick sheet galvanized carbon steel spill pallet; gutter and downspouts, removable hot-dip galvanized grating floor with 34x76 mm 25x2 mm flat mesh and load capacity 600 kg / m2 and internal shelving. The walls and doors are made of corrugated sheets with 20 mm ridges printed on 30x30 tubular frames. The roof, instead, is made of sheets with 20 mm ridges.

All the modulcontainer models are made in compliance with the provisions of Legislative Decree 152/06 consolidated environmental text and related standards and are supplied complete with the following documentation:
• Watertight declaration of the tank as required by the Legislative Decree 152/06;
• Declaration that natural ventilation is in accordance with D.M. 18/05/95 with grids of dimensions equal to 1/30 of the plan surface;
• Declaration of the capacity of the grating floor;
• Welding declaration: in accordance with UNI EN ISO 3834-2.2006 with production control plan under surveillance - with qualified welders in accordance with EN 9606-1: 2013 - with welding process in accordance with UNI EN ISO 15614-1: 2012 , UNI EN ISO 9001: 15 certified quality system;
• User and maintenance manual (the operator must always use the Personal Protective Equipment as per Legislative Decree 81/08 for the operations listed in the manual).

The construction of the spill pallet takes place in compliance with Italian laws. It is in fact made to be able to contain the greater of 33% of the volume and the volume of the largest container stored. If you want to use the modulcontainer outside the Italian territory, it will be essential to find out what the relevant legislation is (for example in France 50% of the stored volume is foreseen, while in Germany 10%). The ventilation grilles are also structured according to the Italian standard: if you intend to use the modul container outside the Italian territory, it is therefore important to check the national regulations on the subject (for example in France the grilles are mandatory, while in Germany are recommended, but the number and structure required may vary).

The handling of the modulcontainer can take place, depending on the model chosen, by means of a forklift that must be equipped with an extension of the forks or by crane with hooking from the base. When not provided as standard, handling by crane can be purchased as an accessory feature and in this case bear in mind that it will be possible for you to move your modulcontainer in both ways (crane and forklift). 

Different models of modulcontainer are available, of different sizes that can contain up to 48 drums on pallets. To best adapt the model chosen to your needs, various accessories are available such as the access ramp with or without flap, the non-Atex lighting system, the non-Atex air conditioning system and the non-Atex suction / ventilation system. In addition, if you wish to store the drums horizontally, it is possible to fit your modulcontainer with the appropriate structure, the composition of which varies depending on the container in which it is mounted. This structure will in fact consist of drum support cradles (1 for each drum), 1 to 3 pairs of shelf beams and 1 to 3 pallet support tubes. On request, it is also possible to fit your modulcontainer with a spill pallet with greater capacity.