Modulcontainer for floor drums with EI/REI120 certified panels, spill pallet and sliding doors

The modulcontainer is the ideal solution for outdoor areas if you need to store on the floor drums containing hazardous substances. For each specific substance, it will be the safety advisor or the in-house HSE manager who will decide on the suitability of the container to hold these substances. The structure is made up of walls and doors in EI 120 certified panels insulated in mineral wool, 100 mm thick, fire reaction class A2-s1-d0. The door has a 63 mm thick wing. The roof, on the other hand, is made using corrugated panels (40 mm-thick ridges) certified REI 120 insulated in mineral wool, 100 mm-thick, fire reaction class A2-s1-d0. The standard equipment includes: provision for fixing to the ground using dowels (securing is up to the user); continuous 80 mm slides for support; ventilation grilles; gutter and downspouts; 2 mm thick galvanized carbon steel spill pallet; pre-painted sandwich panel sheet metal thickness 5/10 walls and roofing; removable hot-dip galvanized grating floor with 34x76 mm flat 25x2 mm mesh and load capacity 600 kg / m2. The painting on slides, spill pallet, downspouts and profiles is carried out in RAL 9002 but other colors are also available on request.

All the modulcontainer models are made in compliance with the provisions of Legislative Decree 152/06 Unified Text on Environmental Protection and related standards and are supplied complete with the following documentation:
• Watertight declaration of the tank as required by the Legislative Decree 152/06;
• Declaration that natural ventilation is in accordance with D.M. 18/05/95 with grids of dimensions equal to 1/30 of the plan surface;
• Declaration of the capacity of the grating floor;
• Welding declaration: in accordance with UNI EN ISO 3834-2.2006 with production control plan under surveillance - with qualified welders in accordance with EN 9606-1: 2013 - with welding process in accordance with UNI EN ISO 15614-1: 2012 , UNI EN ISO 9001: 15 certified quality system;
• User and maintenance manual (the operator must always use the Personal Protective Equipment as per Legislative Decree 81/08 for the operations listed in the manual).

The spill pallet is designed and built in compliance with current legislation within the Italian territory. It is in fact designed to contain the greater of 33% of the stored volume and the volume of the largest container stored. To use the modulcontainer outside Italy, it is essential to find out what the relevant legislation provides for that specific country (for example in France 50% of the stored volume is envisaged, while in Germany 10%). Even the ventilation grilles are structured on the basis of the provisions of the Italian standard: if you intend to use the module container outside the Italian territory, it is therefore important to check the national regulations on the subject (for example, in France the grilles are mandatory, while in Germany they are recommended, but the number and structure required may vary).

The modulcontainer can be moved by a forklift with fork extension thanks to the presence of the forklift pockets. It is also possible to purchase, as an accessory, the provision for handling with a crane by hooking it from the base and in this case bear in mind that you will be able to move your container in both ways (crane and forklift).

The modulcontainer is available in the version for 8 or 16 drums on 1200x1200 pallets. It is also possible to customize it in order to adapt it to your specific needs, thanks to the available accessories. In fact, it is possible to purchase the access ramp with or without flap (with forklift pockets), the non-Atex lighting system, the non-Atex air conditioning system, the non-Atex suction / ventilation system. On request, it is also possible to obtain the Atex-approved version of the lighting system and a floor spill pallet with greater capacity.