Modulcontainer for floor tanks in steel with spill pallet and swing doors group size 2

The modulcontainer is the storage solution for tanks containing hazardous substances. In any case, it must be the safety advisor or internal HSE manager who decides on the suitability of the container according to the type of hazardous substance to be stored. The structure is made using galvanized and corrugated carbon steel for the walls and the roof and is equipped with one or two doors with two hinged wings (depending on the model chosen). The standard supply includes: provision for fixing to the ground by means of dowels, 80 mm slides for support, downspouts and gutter, ventilation grilles, 2 mm thick galvanized carbon steel spill pallet, removable hot-dip galvanized grid floor with 34x76 mm mesh 25x2 mm flat and 1000 kg / m2 load capacity, walls and doors made with corrugated sheets with 20 mm ridges printed on 30x30 tubular frames and roof made with corrugated sheets with 20 mm ridges. Carbon corrugated galvanised sheet metal thickness 4/10 on walls and 5/10 on roofing. The modul container it is available both in the galvanized version and in the galvanized version painted in RAL9002 color, however it is possible to request the painting in another color.

To produce the modulcontainer, the provisions of Legislative Decree 152/06 consolidated environmental text and related standards are respected and are supplied complete with the following documentation:
• Watertight declaration of the tank as required by the Legislative Decree 152/06;
• Declaration that natural ventilation is in accordance with D.M. 18/05/95 with grids of dimensions equal to 1/30 of the plan surface;
• Declaration of the capacity of the grating floor;
• Welding declaration: in accordance with UNI EN ISO 3834-2.2006 with production control plan under surveillance - with qualified welders in accordance with EN 9606-1: 2013 - with welding process in accordance with UNI EN ISO 15614-1: 2012 , UNI EN ISO 9001: 15 certified quality system;
• User and maintenance manual (the operator must always use the Personal Protective Equipment as per Legislative Decree 81/08 for the operations listed in the manual).

The spill pallet included in the standard supply is made in compliance with the Italian legislation which provides that the tank is capable of collecting the largest between 33% of the stored volume and the total volume of the largest container stored. It will therefore be essential to inquire about the regulations in force if you want to use the modulcontainer outside the Italian territory (for example in France 50% of the stored volume is required while in Germany 10%). In the same way, the ventilation grilles are structured according to the Italian standard: if you intend to use the module container outside the Italian territory, it is therefore important to check the national regulations on the subject (for example, in France the grilles are mandatory, while in Germany are recommended, but the number and structure required may vary).

To move the modulcontainer, you can use a forklift equipped with fork extensions, thanks to the presence of the appropriate fork pockets. If necessary, it is also possible to purchase as an accessory the handling by crane with hooking from the base and in this case please bear in mind that you will be able to move your container in both ways (crane and forklift). 

Different versions of the modulcontainer are available, of different sizes, which can contain up to 6 tanks. It is also possible to further accessorise the selected model with: access ramp with or without flap, non-Atex lighting and air conditioning systems, non-Atex suction / ventilation system. Furthermore, upon request, it is possible to fit your container with a spill pallet with greater capacity.