Modulcontainer open space with polyurethane insulated panels, spill pallet and sliding doors

The modulcontainer is a safe outdoors storage system for hazardous substances. Depending on the substances to be stored, the company's HSE manager or the safety advisor will decide on the suitability of the container to contain the specific substance. The standard equipment of this modulecontainer consists of: provision for fixing to the ground with dowels; ventilation grilles; 80 mm slides for support; removable hot-dip galvanized grid flooring with 34x76 mm mesh and 52x2 mm plate with a capacity of 600 kg / m2; 2 mm thick steel spill pallet; gutters and downspouts; pre-painted sandwich panel sheet metal thickness 4/10 walls and roofing. The walls and doors with two sliding doors are made with insulated panels in polyurethane with a thickness of 50 mm, fire reaction class F, fire resistance NPD. The roof is made by using polyurethane insulated corrugated panels with a thickness of 40 mm (+40 mm ribs), fire reaction class F, fire resistance NPD. The painting on the slides, the spill pallet, the downspouts and the profiles is made in RAL 9002 color, but other colors are available on request.

The available models of modulcontainer are made following what is indicated by Italian Legislative Decree 152/06 consolidated environmental text and related standards and are supplied complete with the following documentation:
• Watertight declaration of the tank as required by the Legislative Decree 152/06;
• Declaration that natural ventilation is in accordance with D.M. 18/05/95 with grids of dimensions equal to 1/30 of the plan surface;
• Declaration of the capacity of the grating floor;
• Welding declaration: in accordance with UNI EN ISO 3834-2.2006 with production control plan under surveillance - with qualified welders in accordance with EN 9606-1: 2013 - with welding process in accordance with UNI EN ISO 15614-1: 2012 , UNI EN ISO 9001: 15 certified quality system;
• User and maintenance manual (the operator must always use the Personal Protective Equipment as per Legislative Decree 81/08 for the operations listed in the manual).

The spill pallet is designed and built following the provisions of Italian legislation on the storage of hazardous substances. This provides that the spill pallet must be able to contain the greater of 33% of the volume stored and the total volume of the largest container stored. Depending on whether you plan to use the modulcontainer outside the Italian territory, it will be necessary to inquire about the regulations in force (for example in France 50% of the stored volume is required while in Germany 10%). In the same way, the ventilation grilles are structured according to the Italian standard: if you intend to use the module container outside the Italian territory, it is therefore important to check the national regulations on the subject (for example, in France the grilles are mandatory, while in Germany are recommended, but the number and structure required may vary).

The modulcontainer is equipped with a fork passage for handling by forklift (equipped with a special fork extensions). It is also possible to select as an optional the handling by crane with hooking from the base (in this case it will be possible for you to move the modulcontainer both with a forklift and with a crane).

To further customize your modulcontainer, it is possible to purchase as accessories the internal shelving (positioning to be agreed upon) with shelves of different lengths and depths 415 mm (380 mm grating + 35 mm rear vertical guide), the access ramp with or without flap (with forklift pockets), non-Atex lighting system, non-Atex air conditioning system and non-Atex suction / ventilation system. In addition, on request it is possible to obtain a greater capacity of the spill pallet positioned on the floor.