Planer thicknesser Fervi 0686/200
In stock
The planer thicknesser is a combined machine, designed for processing wooden planks, which allows you to plan a surface and give a piece of wood a specific thickness. During flush planing, the piece of wood is advanced over the planer shaft and its lower surface is planed. During the thickness planing, on the other hand, the wooden plank is placed on the height-adjustable platform and advanced under the planer shaft. In this way the top surface of the component is machined.
This planer thicknesser model is composed of a main frame with infeed and outfeed tables and work platform, electric motor with drive rollers, two-blade planer shaft and start and thickness adjustment controls. It is important to specify that this type of equipment is to be considered as a service, therefore suitable for intermittent work throughout the day. It is therefore not a suitable tool for the continuous use of the production departments.
Before each start-up, the machine must be strictly connected to a dust extraction device. In particular, for the flush planing operations the suction nozzle is located under the work table, while for the thickness planing operations the suction nozzle is the one positioned above the work table.
The planer thicknesser is equipped with a bridge guard that can be adjusted crosswise and in height that protects the planer shaft. This guard prevents the operator from coming into direct contact with the cutting tool and protects him from any splinters and blade fragments.
Code | R0686200 |
Dimensions mm | 770x430x450 |
Worktops height | 360 mm |
Worktops dimensions | 737x210 mm |
Shaft section | Ø 50 mm |
Blades | 2 |
Surface planer capacity | 204x2 mm |
Thickness capacity | 204x2x120 mm |
Shaft revolutions | 8000 rpm |
Single-phase motor | 230 V 50 Hz 1,25 kW |
Weight kg | 25 |