Transmission jack Fervi 0094 capacity 500 kg
In stock
The Fervi 0094 transmission jack is a solution designed to allow the lifting and / or lowering of loads. In particular, its main use is designed for handling vehicle transmissions, gearboxes and differentials, in order to make maintenance and repair operations easier. To ensure safety during use, the tool must be used on a flat, smooth surface of adequate hardness and strength, in fact it must be capable of supporting the weight of the lifter and the maximum nominal capacity.
The hydraulic transmission jack consists of: a fixed saddle, an adjustable saddle, a descent knob, a handle, a foot pump, pivoting wheels and a cylinder. To lift the load, simply apply pressure repeatedly on the lifting pedal until the desired height is reached. To lower the load, on the other hand, simply rotate the spring knob, keeping it rotated until the desired height is reached.
To allow safe use of the transmission jack, it is equipped with a load limiter as a safety device. This limiter consists of a maximum pressure valve which allows the lifter to be secured against overloads. In fact, this valve prevents the internal pressure of the hydraulic circuit from exceeding the calibration value set as a function of the maximum nominal flow rate.
The hydraulic transmission jack has a f Its dimensions are 1190 × 700 × 660 mm, while the minimum lifting height is 1190 mm and the maximum height of 2000 mm. The instrument also weighs 32.5 kg and can be easily moved thanks to the wheels.
Codice | R0094 |
Lifting capacity kg | 500 |
Dimensions mm | 1190 × 700 × 660 |
Lifting height mm | 1190 ÷ 2000 |
Weight kg | 32,5 |