Clean and dirty lockers metal 3 doors with lock 3 places monoblock Armet

The clean and dirty lockers with three doors is the solution designed to organize spaces with different units. Each compartment is equipped on the inside with a clean dirty partition that allows you to separate work uniforms from personal clothes, thus ensuring greater hygiene within the workplace. Equipped with 3 doors and 3 internal compartments, all equipped internally with an upper shelf, hanger rod with two “S” hooks in galvanized steel and partition between the shelf and the bottom, this locker is particularly comfortable. The doors, on the other hand, are supplied with umbrella holder wire and plastic drip tray, cylinder lock or padlockable handle and printed tag holder.

The structure of the clean and dirty lockers is made up of a single panel between the roof and the back joined by micro-joints to create slots for ventilation and sides with a front thickness of 30 mm and folded cut-resistant edges. The monobloc locker measures 1200x500x1800 mm while the dimensions of the individual compartments are 418x480x1610 mm. The locker is available in the standard version in RAL 7035 gray, and on request in 6 different colors.

The cabinet doors are equipped with internal hinges with an external 180 ° rotation pin, reinforcement rowing on the hinge side, anti-cut folds on three orders and ventilation slots. The metal cabinet complies with the legislation and in fact it presents a declaration of compliance with the italian Legislative Decree 81/2008 and with international standards such as EN UNI ISO 9001, EN UNI ISO 14001 with UNI tests on the product and finishes.

To ensure greater hygiene, in addition to the standard equipment, a sloping roof is available for the clean and dirty lockers, which reduces the accumulation of dust and a shelf for storing shoes inside the compartment. To ensure greater safety, a painted steel plinth is available, while a kit of 4 foot covers can be purchased to protect the feet of the cabinet if you need to install it in a particularly humid room or where the floor is washed on a daily basis. 

The cabinet is manufactured in accordance with the DNSH (Do No Significant Harm) principle, which requires that no significant harm be done to the environment by interventions under the national NRRP. The cabinets are therefore equipped with all the necessary declarations, amongst others UNI EN ISO 14001:2015.