Sandblaster Fervi 0310 outdoor sodium bicarbonate

The sandblaster sodium bicarbonate for outdoor use by Fervi is a machine that allows you to clean and satinise metal surfaces and hard materials. It works by means of a pressurised flow of dry abrasive particles such as sodium bicarbonate. Machining can be performed with different degrees of finish, varying from coarse to fine depending on the particle size and type of workpiece to be machined. The work is carried out directly on the workpiece, thus allowing the work to be checked directly during processing.

The operation of the professional sandblaster is dependent on its connection to a compressor or a centralised compressed air system. These must be capable of providing a constant pressure of 2.5 to 6 Bar. The coupling that allows the connection of the compressed air hose is located under the handle for movement.

At the rear of the sandblaster's tank is not only the compressed air connection, but also a main tap that allows the air to be shut off. In addition, there is a manometer that allows the pressure inside the tank to be checked. Thanks to the special valve, it is also possible to adjust the pressure inside the tank. In the lower part of the tank there is a hole for draining the abrasive material once the machine has been used.

Moving the sandblaster can be done manually by a single operator. This is due both to the low weight and the ease of handling guaranteed by the handle and pair of wheels installed on the machine.