Bench drill press Fervi 0242 with drive belt
In stock
The Fervi 0242 bench drill press with belt transmission is the ideal solution when you need to perform mechanical operations such as drilling, boring and spot boring on different types of materials. In fact, the machine adapts quickly to different processes and different materials by modifying the tool. The drill, thanks to the belt speed transmission, is capable of reaching 16 different levels of spindle rotation speed. The device is equipped with a support base and must be installed on furniture or work benches with adequate resistance to support it.
The Fervi bench drill press has manual feed. The spindle is moved by means of the spindle descent handwheel. Equipped with a LED lighting lamp, it facilitates visibility during use. The processing is also made easier by the digital depth gauge and the table which is rotatable and tiltable.
The bench drill press is equipped with a belt spindle rotation speed transmission system. This type of transmission is ideal for when often repetitive operations are carried out that do not require many speed changes. The drill represents a service tool and not a production tool, perfect to be used to perform intermittent machining. +
The bench drill press is equipped with a 230 V 50 Hz 0.75 kW single-phase motor. The 305 x 305 mm table has a tilt capability of ± 45 °. The continuous drilling capacity is 16 mm in diameter. The drilling capacity with pre-hole on cast iron is 25 mm, while on steel it is 20 mm.
Review for Bench drill press Fervi 0242 with drive belt
| Code | R0242 |
| Drilling capacity on cast iron with pre-hole | Ø 25 mm |
| Max drilling capacity on steel with pre-hole (s235jr) | Ø 20 mm |
| Continuous drilling capacity | Ø 16 mm |
| Morse taper | CM 2 |
| Spindle | 1 - 16 mm B18 |
| Approximate spindle speed | (16) 180 ÷ 2770 rpm |
| Spindle stroke | 85 mm |
| Dinghy | Ø 47 mm |
| Column | Ø 72 mm |
| Height | 990 mm |
| Spindle-column distance | 180 mm |
| Distance between machine nose and table | 420 mm |
| Distance between machine nose and base | 600 mm |
| Table dimensions | 305x305 mm |
| Quarry | 16 mm |
| Table inclination | ± 45° |
| Single-phase motor | 230 V 50 Hz 0,75 kW |
| Weight kg | 60 |
| Accessories included | Keyless chuck 1 - 16 mm B18, spindle connection CM 2 |
