Debris chute hopper

The debris chute hopper is the ideal product for unloading rubble during construction or renovation work at higher levels. It provides the operator with a much easier and cleaner job of loading debris. This can be achieved thanks to the shape, inclination and width of the loading mouth that makes up the hopper. Made of high-grade linear polyethylene, it has an extremely robust structure capable of tolerating and absorbing more impact.

This type of debris chute hopper allows for a continuity of the column towards the upper floors, so that simultaneous discharges of rubble can be carried out easily without interfering with the work taking place on the lower floors. The material used is also ideal for withstanding and cushioning shocks.

A galvanised steel fixing frame is mandatory for the use of the debris chute hopper. The latter must be fixed to the wall of a balcony or scaffold and allows the load of the column to be supported by two snap hooks. In addition to the column, it supports above all the hopper, as the hopper is slipped inside the support and is held on the upper edge.

The inlet of the debris chute hopper measures 640x420 mm, while the outlet has a diameter of 390 mm. Finally, the dimensions of the debris hopper are 980x740x850 mm and it is available in yellow.