Sandblaster Fervi 0462 outdoor with dust collector

The sandblaster by Fervi for outdoor use is a tool designed to clean and satin-finish metal surfaces, building walls or hard materials in general. It does this by using a pressurised flow of dry abrasive particles such as glass or abrasive stone granules. Depending on the abrasive particle selected, the finish may be coarser or finer. This type of product is to be considered a service tool and not a production tool, as it is not suitable for continuous use but rather more apt for intermittent use.

To prevent dust or other particles from being dispersed into the surrounding environment, the sandblaster is equipped with a dust collection system. This is capable of sucking in both the dust that is produced during sandblasting and the granules that are ejected during processing. The dust collector is also equipped with an air filter capable of retaining the work dust.

In order to be able to sandblast surfaces with the professional sandblaster, it must be connected to a compressor or a centralised compressed air production system. These devices must be capable of producing a constant pressure of 7 Bar. The connection for the compressed air hose is located at the rear and bottom of the machine body.

Thanks to the presence of the 4 wheels and the handle, moving the sandblaster is facilitated. On the cover of the machine there is a switch for switching the machine on, while on the gun there is a trigger lever with maintained action that allows the compressed air necessary for machine operation to be released.