Bench geared drilling machine Fervi T059/28V

Shipping : 10/15 days
€2,523.39 Regular Price €4,427.00

In stock

SKU
tf6
(Special Price inc. VAT 3078.00 €)

The bench geared drilling machine is a compact solution for performing operations such as drilling and milling on different materials. To carry out the different processes, it will be sufficient to vary the tool according to the operations to be performed and the material of the piece to be processed. The machine gives the possibility of selecting different spindle rotation speeds. This is powered by a gear transmission system that allows the variation between two different speed ranges. Before modifying the spindle rotation speed, it is therefore necessary to choose the selected speed range and then adjust the spindle speed – which can be viewed on the display – by means of a potentiometer.

To select the speed range within which to work with the bench geared drilling machine Fervi, there is a ring on the right side of the machine that allows you to set the scale of the spindle rotation speed. This speed can then be varied continuously by using the potentiometer located in the control panel. The advancement of the spindle is manual and takes place thanks to the radial wheel equipped with 3 levers that allows rapid advancement if rotated counter-clockwise; when released it does not return to the initial position, but remains stationary in the established position.

The table of the bench geared drilling machine has two handwheels on the longitudinal ends that work in unison and allow the longitudinal calibrated advancement of the work table. A third spindle, on the other hand, allows the calibrated transverse feed of the table. There are also locking levers for the longitudinal and radial movement of the table.

Along the vertical sleeve of the bench geared drilling machine there is an analogue gauge which has the purpose of measuring the vertical sliding of the sleeve. When the calibrated slide is activated by using the knob in the centre of the handwheel, it is also possible to operate the electronic instrument for measuring the excursion of the sleeve which has a precision of one hundredth of a millimetre.

Customize Bench geared drilling machine Fervi T059/28V
1pcs -   RT05928V  - 230 V motor -   €2,523.39  - [10/15 days]

* Required Fields

Your Customization
Armadietto spogliatoio in metallo 1 anta con serratura 1 posto
Bench geared drilling machine Fervi T059/28V

In stock

Special price: €2,523.39
-
+

Configuration

    Configure the product with the available accessories, then add the desired quantity to the cart. Repeat the operation for each configuration.
    For a quick, no- obligation quote, configure your products, add them to the cart and proceed to checkout. Here enter the delivery location and the system will calculate the total including shipping costs. Click here for the buying guide.

    Review for Bench geared drilling machine Fervi T059/28V

    Brand: Fervi
       
    Code RT05928V
    Max drilling capacity on steel with pre-drilling hole(s235jr) mm Ø 28
    Face milling cutter max mm Ø 63
    End milling capacity mm Ø 28
    Spindle taper CM 3
    Chuck 3 - 16 mm B16
    Approx spindle speeds 100 ÷ 2500 rpm ±10%
    Spindle rotation right-left
    Spindle stroke mm 70
    Quill mm 70
    Headstock travel mm 380
    Head tilt left and right ±90°
    Table dimensions mm 730 x 210
    Slot mm 14
    Table longitudinal axis mm 190
    Table cross axis mm 440
    Single-phase motor 230 V 50 Hz 1,1 kW
    Battery type Lithium battery (button cell)
    Battery features 2 x 3 V CR2032
    Battery weight kg 0,008
    Weight kg 270
    Standard Drill chuck with key 3 - 13 B16, drilled spindle CM 3, Oilcan, draw bar M12, service wrenches
     Download the Fervi drilling machine selection guide.