Bench geared drilling machine Fervi T058

The bench geared drilling machine Fervi is the tool that allows you to drill, mill and thread different types of material. Depending on the processing to be carried out and the type of material, it will therefore be necessary to vary the tool to be used. The machine provides for different spindle rotation speeds that can be reached thanks to a gear system that allows you to adjust the variation between two speed ranges. It is in fact necessary to first select – through the lever located behind the ignition switches – the rotation speed of the spindle, which can be subsequently modified thanks to the potentiometer on the basis of the configuration of the gears that has been engaged.

For the advancement of the drilling machine’s spindle there is a handwheel equipped with three levers that allows the rapid advancement of the spindle for drilling if rotated counter-clockwise, while if rotated clockwise it allows the quick rise of the spindle. There is also a ring which operates the slow and calibrated advancement of the spindle.

The table included in the equipment of the bench geared drilling machine Fervi can be moved longitudinally and transversely. To do this, there are two small steering wheels, one positioned on the side of the table and the other one on the front. It is also possible to adjust the head block and lock it by using the appropriate lever, in order to use the head as a preset limit switch and also in order to limit its vertical translation.

The head of the bench geared drilling machine can be tilted up to ± 45 °: to adjust the inclination it is necessary to unscrew the bolt on the back of the head, extract the upper spring pin and then tilt it. The head is equipped with some fixed positions with holes in which the spring pin can be inserted. However, any inclination within the maximum adjustment range is possible.