Modulcontainer open space in steel with spill pallet and sliding doors group size 2

The modulcontainer is the solution that allows you to safely store hazardous substances outdoors. Decisions on the suitability for containment of this type of substance are in any case the responsibility of the HSE manager or safety consultant.Thanks to the open space structure it is possible to store different types of containers. The standard equipment of the modulcontainer includes: ventilation grilles, predisposition for securing to the ground with dowels (securing is up to the purchaser), continuous 80 mm slides for support, hot-dip galvanized grating floor with 34x76 mm mesh 25x2 mm flat - load capacity 600 kg / m2,  spill pallet in 2mm-thick galvanized carbon steel, walls and doors made with sheets with a 20 mm corrugation printed on 30x30 tubular frames, cover with sheets with a 20 mm corrugation, gutter and downspouts; carbon corrugated galvanised sheet metal thickness 4/10 on walls and 5/10 on roofing. All models are available both in the galvanized version and in the galvanized version painted in grayish white RAL9002, but other colors are also available on request.

All the modulcontainer models are made according to the provisions of the Italian Legislative Decree 152/06 consolidated environmental text and related standards and are supplied complete with the following documentation:
• Watertight declaration of the tank as required by the Legislative Decree 152/06;
• Declaration that natural ventilation is in accordance with D.M. 18/05/95 with grids of dimensions equal to 1/30 of the plan surface;
• Declaration of the capacity of the grating floor;
• Welding declaration: in accordance with UNI EN ISO 3834-2.2006 with production control plan under surveillance - with qualified welders in accordance with EN 9606-1: 2013 - with welding process in accordance with UNI EN ISO 15614-1: 2012 , UNI EN ISO 9001: 15 certified quality system;
• User and maintenance manual (the operator must always use the Personal Protective Equipment as per Legislative Decree 81/08 for the operations listed in the manual).

The spill pallet complies with the Italian legislation on the containment of hazardous substances. In fact, it is designed to contain the greater of 33% of the volume stored and the volume of the largest container stored. To use the modulecontainer outside the Italian territory, it is necessary to check which regulations are in force in that specific country (for example in France 50% of the stored volume is foreseen and in Germany 10%). The ventilation grilles are also structured according to the Italian standard: if you intend to use the modul container outside the Italian territory, it is therefore important to check the national regulations on the subject (for example in France the grilles are mandatory, while in Germany are recommended, but the number and structure required may vary).

All modulcontainer models are equipped with forklift pockets for handling by forklift. It is possible to select as an option the possibility of adding a predisposition for handling with a crane by hooking it from the base and in this case you will be able to handle it in both ways.

Thanks to the vast amount of accessories available, it is possible to customize the modulcontainer so that it can best meet your needs. In fact, it is possible to purchase, in addition to the crane-handling set-up: internal shelving (positioning to be agreed upon) with 2 shelves of different lengths and with a depth of 415 mm (380 mm of grating and 35 mm of rear vertical guide), access ramp with or without flap with forklift pockets, non-Atex lighting system, non-Atex air conditioning system that allows you to keep the internal temperature under control and non-Atex suction system. On request, it is also possible to have a greater capacity of the floor spill pallet.