Portable office cabin with 50 mm thick walls jumbo size

The portable office cabin jumbo size is the roomy option with walls as thick as 50 mm, a perfect fit for situations where the presence of many workers requires particularly generous work areas. Managing emergencies, expanding space, managing construction sites and coordinating trade fairs or events are just some of the many possible uses for this product. Double the space is immediately possible thanks to the instant set-up of the mobile office, which is delivered already assembled. Upon request, it can be ordered disassembled.

The structure of the portable office cabin consists of the following elements:
• base and roof profiles: 2 mm galvanised and painted sheet metal;
• base: on support beams;
• walls: 50 mm sandwich panels insulated with expanded polyurethane foam between two pre-painted sheets with a white/grey RAL 9002 micro-grooved exterior/interior finish;
• roof: corrugated sandwich panels 40/80 mm, insulated with polyurethane foam, finish colour white-grey RAL 9002;
• floor: PVC walking surface on 18 mm chipboard panel.

This version of the portable office cabin boasts safe, quality aluminium/PVC fixtures in white RAL9010 colour with protective glazing bars, smooth and a good 4 mm thick. An external 900x2000H mm half panelled and half glazed door and two 900x980H mm sliding windows are installed as standard on all models. The site cabin is complete with an electrical system with visible cables along the inside walls consisting of: 2 40W LED ceiling lights, 2 10-16A sockets, 1 switch, 1 external box with magnetothermal circuit breaker panel and earth socket.

Various models of portable office cabin can be ordered with standard lengths of 4.8 metres and depths from a minimum of 4 to a maximum of 8 metres, and 3 different heights: external 2.47 m/ internal 2.23 m, external 2.7 m/ internal 2.4 m, or external 2.98 m/ internal 2.7 m. All can be handled with a crane - with chains or belts of adequate capacity thanks to the eyelets in the corners - but it is possible to add the kit with forklift pockets for handling with forklift trucks as an accessory. Each mobile office has an identification plate with serial number and a declaration of conformity for the electrical system can be obtained on request. No other certifications are required.