Belt wood sander Fervi 0564 tilting for bench
In stock
The belt wood sander by Fervi is a very useful tool for working on wooden pieces. Easy to use, it is suitable for different working environments, such as craftsmen's workshops or production departments. Thanks to the abrasive belt, it enables large surfaces to be sanded and burrs from cutting wood to be removed. Thanks to the abrasive disc, on the other hand, it is also possible to carry out the same type of work on edges and corners, either at right angles or with a tilt.
The sanding belt of the belt wood sander can be tilted. It can therefore be used both vertically and horizontally, and has a practical workpiece holder. There is also an extruded aluminium work table. The work table can be tilted up to 45° to facilitate all types of machining. In addition, there is a square on the table for workpiece orientation.
The start and stop controls of the Fervi belt sander are located on the machine body on the abrasive disc side. The control device built into the sander's electrical circuit is a two-button magnetic switch. This ensures a high level of safety against unintentional machine start-up.
The belt wood sander is a service machine and not a production machine. This means that it cannot be used continuously during the working day, but rather its use must occur intermittently.
Code | R0564 |
Dimensions mm | 470x360x290 |
Single-phase motor | 230V 50 Hz 370 W |
Belt mm | 914x100 |
Belt speed | 450 m/min |
Belt grain | 80 |
Disc diameter mm | 150 |
Disc grain | 80 |
Rotation speed | 2980 rpm |
Table inclination | 0 ÷ 45° |
Table dimensions mm | 226x160 |
Weight kg | 16,5 |