Pallet wrapper self-propelled with arm and guide wheel

The pallet wrapper self-propelled with folding arm is the ideal solution when high production loads and limited manoeuvring space are required. Forkable from both sides, the pallet wrapper is also equipped with a push-button drawbar for easy transport within the work area. Thanks to the guide wheel, it can adapt to pallets of all shapes and sizes. The polycarbonate bumper ensures total safety for the working environment and operators and makes the pallet wrapper impact-resistant.

It is possible to choose between different pallet wrapper models based on the type of spool film carriage installed. The carriage can be equipped with:

• Mechanical brake: the film tension is adjustable via a knob. Recommended for low production rates without the need for variable palletising or special wrapping.

• Electromagnetic friction: the film tension is adjustable via a panel. Recommended for low productions, but with a need to modulate the tension force during the cycle itself.

• Fixed pre-stretching: the film tension is controlled by a sensor that measures its value. It pre-stretches the film with a mechanical command generated by a pair of gears.

Recommended for loads that are not very stable, delicate or for large productions as it saves metres of film: with pre-stretching ratios of 200%, for every metre of film withdrawn it deposits 3 metres on the load to be packed. Wheels for 150% and 250% ratio are also supplied.

The pallet wrapper is designed to process:

• 15/20 pallets per hour;

• palletised load with minimum dimensions 600x600x300 mm and maximum wrapping height 2000 mm (greater heights are available as an option).

The control panel allows for the management of various parameters allowing for up to 6 wrapping programmes. The batteries are sealed and allow charging in the work area with the high-frequency battery charger (230 V - 50/60 Hz). The pallet wrapper is compatible with standard machineable reels, i.e. with a cardboard core max. external Ø 250 mm (or 300 mm if trolley with fixed pre-stretching) - internal Ø 76 mm - h 500 mm. Finally, if you wish to use the machine with manual film with a Ø 50 mm core, you can select the optional additional spool holder set.